Antitacks

Talcubex
Non-dusting talcum powder without any remarkable quartz content (< 1 %). Due to the additive content, Talcubex has excellent adhesion properties, therefore it conforms to the requirements of a clean and modern working environment.

Antitack NP-97
Zinc stearate dispersion for the use as antitack agent for all kinds of uncured rubber compounds. The zinc stearate particles melt at a temperature of 120 C and will be absorbed by the rubber compound. Antitack NP-97 shows no negative influence on molding properties or rubber-metal-bonding.

Antitack NP-97/TY-40
Highly concentrated dispersion of zinc stearates, higly recommended use as antitack agent for uncured rubber compounds. Antitack NP-97/TY-40 is suitable especially for batch-off machines with spraying systems. The zinc stearate dispersion additionally contains an emulsifier which ensures an easier dilution in water.

Antitack BTO-7
Non-foaming transparent antitack agent for the treatment of uncured rubber sheets, strips or granules which is especially suitable for spraying systems. The high content of detergents will guarantee uniform treatment and high effectiveness

Antitack BTO-15
Bio-degradable antitack agent, suitable for batch-off machines with dipping and spraying equipment to treat uncured rubber batches, granules or strips. After drying, the antitack agent creates a very thin non-slippery polymer layer on the surface of the rubber compound. Therefore it supports further processing of rubber compounds, using extruders or an open mill. Rubber compounds with cold flow can be treated successfully with Antitack BTO-15, due to the flexible polymer film.

Antitack BTO-20
Mandrel release agent, most suitable for the production of hoses cured in autoclaves. Antitack BTO-20 prevents the sticking of the rubber compound to the mandrels. The vulcanized hoses can be removed very easily. Antitack BTO-20 is soluble in water and free of silicones.

Antitack BTO-30
Highly effective magnesium stearate dispersion for the use in batch-off equipment working either with dip tanks or spraying systems, for the treatment of uncured rubber sheets, strips or granules.

Antitack BTO-31 LF
Highly effective magnesium stearate dispersion for the use in batch-off equipment working either with dip tanks or spraying systems, for the treatment of uncured rubber sheets, strips or granules. The fine particle size of the magnesium stearate and the extraordinary stability of the dispersion of the antitack agent will form a thin, nearly transparent antitack film which will be absorbed by the rubber compound at temperatures of approx. 90 C. Antitack BTO-31 LF contains detergents, antirust and antifoam agents which will ensure maintenance-free operation of the batch-off equipment. Special additives enable the evaluation of the concentration by conductivity.

Antitack BTO-33
Highly effective magnesium stearate dispersion for the use as antitack agent for uncured rubber compounds. By using a special production method, the magnesium stearate is partially hydrophobic, therefore the pigments will rise up to the upper level of the dip tank. The antitack film of Antitack BTO-33 is drying very quickly and will be absorbed by the rubber compound already at temperatures of approx. 90 C. Antitack BTO-33 has been developed considering the latest ecological aspects.

Antitack BTO-36
Magnesiumstearate dispersion, similar to Antitack BTO-33; improved dry matter con­tent combined with additional additives for better wetting properties of rubber com­pounds.

Antitack BTO-40 TP
Antitack BTO-40 TP is an antitack agent, basically containing minerals in combination with detergents, antifoam and antirust agents in powder form, for the treatment of unvulcanized rubber compounds, endless strips and granules. After drying, the antitack film which remains on the surface of treated rubber parts is almost transparent. Antitack BTO-40 TP was developed according to most recent economical and ecological requirements. All liquid components are showing a bio-degradability of at least 80 %. The product itself is supplied as powder concentrate, which guarantees superior efficiency.

Antitack BTO-44 VC
Antitack BTO-44 VC is an antitack agent, basically containing minerals in combination with detergents, antifoam and antirust agents in powder form, for the treatment of unvulcanized rubber compounds, endless strips and granules. Antitack BTO-44 VC was developed according to most recent economical and ecological requirements. All liquid components are showing a bio-degradability of at least 80 %. The product itself is supplied as powder concentrate, which guarantees superior efficiency.

Sitemap | Imprint | Data Protection | Help | Terms & Conditions
Kettlitz-Chemie GmbH & Co. KG - Industriestr. 6 - 86643 Rennertshofen
Company
Products
Contact
Downloads
Plasticizers
Processing Aids
Activators
Coupling Agents
Desiccants
Antitacks

German
English