| Dispergator FL | ||
 |
Processing aid in granular form with excellent compatibility in all standard elastomers like NR, SBR, EPDM, CR, NBR, IIR, CSM, ECO, etc. Dispergator FL has an excellent influence on filler dispersion and homogeneity of rubber compounds. While extruding and calandering significant improvements in processability can be achieved. Already small dosages of Dispergator FL will cause a clearly recognizable improvement in rubber compound flow. | |
|
|
||
| Dispergator FL plus |
||
 |
Improved version of Dispergator FL. In comparison to Dispergator FL, Dispergator FL plus shows stronger influence on rubber compound flow and Mooney viscosity. Good compatibility with all standard elastomers, such as NR, SBR, EPDM, CR, NBR, IIR, CSM, ECO, etc. | |
|
|
||
| Dispergator FD | ||
 |
Highly effective processing aid for compounds in alimentary contact. It has been developed according to the regulations of FDA and BfR XXI (formerly BGVV regulation). Kettlitz-Dispergator FD shows excellent compatibility to all polymers commonly used in rubber industry. | |
|
|
||
| Dispergator DS | ||
 |
Processing aid for rubber compounds based on NR, EPDM, IIR and NBR during injection molding and incorporation. Dispergator DS improves the processing behavior of rubber compounds during extrusion and also the filler incorporation. Dispergator DS will not influence the peroxide vulcanization. | |
|
|
||
| Dispergator KB | ||
 |
Dispergator KB contains 25 % more active material than Dispergator DS. The water content is much lower, therefore the product can be used for rubber compounds which are cured by pressureless vulcanization systems like LCM, UHF or hot air. Already during mixing, the incorporation and dispersion of fillers and other compound ingredients can be improved. Dispergator KB shows good compatibility with almost all standard elastomers and has no remarkable influence on the peroxide curing. | |
|
|
||
| Dispergator OX | ||
 |
Polymer- and water-free processing aid in granular form, suitable for all natural and synthetic elastomers. Dispergator OX will accelerate the incorporation of fillers and other compound ingredients and has excellent influence on compound flow and extrusion behavior of rubber compounds, while improving the surface quality at the same time. Dispergator OXl reduces the Mooney viscosity and can be used as peptizer for NR and IR. Dispergator OX is particularly recommended for rubber compounds which are cured in pressureless vulcanization systems. | |
|
|
||
| Dispergator SI/GR | ||
 |
Processing aid based on a silicone combination. The stickiness of EPDM and EVA compounds with poor processability can be significantly reduced. Therefore compound flow and extrusion behavior of the compound will be improved. Especially compounds filled with high quantities of aluminum hydroxide (cable compounds) will show improved process behavior and reduced mold fouling. | |
|
|
||
| Haftolat | ||
 |
Highly effective processing aid, based on low molecular EPM for the use in EPDM, IIR, NBR and CR polymers. The incorporation and dispersion of fillers and all other ingredients will be improved, therefore a reduced mixing time can be achieved. Especially in polychloroprene this will result in lower mixing temperatures which will help to avoid scorch. Haftolat has no influence on sulfur and peroxide curing systems. | |
|
|
||
| Haftolat/P | ||
 |
Dry liquid of Haftolat containing 75 % of Haftolat and 25 % of silica. | |
|
|
||
| Mediaplast WH | ||
 |
Non-staining processing aid and homogenizing agent. Especially in compounds based on NBR, EPDM, SBR and EVA Mediaplast WH will improve processability and tackiness. It supports the incorporation and dispersion of fillers and furthermore has excellent compatibility to all standard elastomers. | |
|
|
||
| Mediaplast WH/P | ||
 |
Dry liquid of Mediaplast WH containing 75 % of Mediaplast WH and 25 % of silica. | |
|
|
||
| Mediaplast PK | ||
 |
Tackifier based on liquid synthetic resins with aromatic character in powder form to be used for rubber compounds based on polar polymers like NBR, HBNR, CR or EVA. The green tack of rubber compounds and adhesion to other materials like textiles, metals or other unvulcunized compounds can be improved. | |
|
|
||
| Mediaplast 40 |
||
 |
Homogenizing agent for polymer blends. Mediaplast 40 supports the incorporation and dispersion of fillers and improves the homogeneity of the rubber compound. Mediaplast 40 is slightly discoloring and should not be used in bright colored rubber compounds. The compatibility in all standard elastomers is excellent. | |
|
|
||
| Mediaplast 50 | ||
 |
Peptizer and homogenizing agent for NR compounds or blends containing NR. Mediaplast 50 reduces the Mooney viscosity, therefore it will influence the process behavior of rubber compounds and the rubber compound flow positively. The incorporation and dispersion of fillers is significantly improved. The compatibility in all standard elastomers is excellent. | |
|
|
||
| Mediaplast 55 | ||
 |
Kettlitz-Mediaplast 55 was especially developed for rubber compounds based on natural
rubber or containing natural rubber as component. It is a compbination of homogenizing agents and a chemical peptizing agent. Polymer blends can be produced much faster and therefore with a higher efficiency. |
|
|
|
||
| Mediaplast 60 | ||
 |
is a highly effective chemical peptizer for natural and Isoprene rubber, based on the well-known dibenzamidodiphenyldisulfide (DBD) with a catalyst system, which enables the product to show superior efficiency in comparison to other products offered on the market today. | |
|
|
||
| Mediaplast AT | ||
 |
Process aid against the stickiness of CR and IIR compounds. Already by using small dosages, Mediaplast AT shows high efficiency; especially suitable for ACM compounds. | |
|
|
||
| Mediaplast EV/F | ||
 |
Very effective processing aid, especially for sticky compounds based on EVA types with a content of vinyl acetate of more than 40 %. Mediaplast EV/F will reduce or eliminate the stickiness of rubber compounds based on polymers like e. g. EPDM, CR or ACM as well. Already at smaller dosages Mediaplast EV/F shows high efficiency. | |
|
|
||
| Mediaplast CL/GR | ||
 |
Chlorinated thermostable paraffin as dry liquid (56 % chlorine) to improve the polarity or to be used as flame retarder in rubber compounds. In comparison to liquid chlorinated paraffins Mediaplast CL/GR provides easy and clean handling, exact measurement, fast incorporation and excellent dispersion. | |
|
|
||
