| Mediaplast PM |
 |
Synthetic all-round plasticizer with non-staining and very good low temperature properties. Mediaplast PM is highly compatible with all standard elastomers. Very good compatibility with polynorbornene and CR. In NBR only limited compatibility. |
|
|
Mediaplast
650 A |
 |
Non-staining synthetic plasticizer with low volatility and good low temperature properties. Especially suitable for EPDM and IIR polymers. Suitable for all non-polar polymers as well. Incompatible with all strong polar polymers like NBR. |
|
|
Mediaplast
PS-1 |
 |
Synthetic plasticizer based on polyalkylbenzene.
Mainly recommended for elastomers with low to medium polarity, e. g. NR, IIR, BR,
SBR, EP(D)M, but also CR, CM/CSM, EVA and polynorbornene rubber (PNR). |
|
| Mediaplast PX-2 |
 |
Semi-synthetic plasticizer based on long-chain hydrocarbons
with paraffinic character for the use in elastomers with low polarity, e. g. NR,
IIR, BR, SBR and EPDM; non-staining with excellent UV resistance. |
|
| Mediaplast NB-4
|
 |
Special ester plasticizer for use in polar polymers like NBR, NBR/PVC, HNBR, CR, ACM, ECO etc. Mediaplast NB-4 has very low volatility at higher temperatures and at the same time a very low freezing point. Therefore it is recommended for the production of rubber parts which should have good heat resistance and additionally good flexibility at cold temperatures. |
|
| Mediaplast NB-7 |
 |
Special diisononyl dicarboxylic acid ester which can replace existing phthalate
plasticizers in compounds based on polar rubber like NBR, HNBR, CR, ACM, VAMAC,
etc. |
|
| Mediaplast TR
|
 |
Bright colored highly aromatic synthetic plasticizer for use in strong polar elastomers and polysulfide polymers such as "Thiokol". Mediaplast TR shows very low volatility at higher temperatures and has a low setting point. |
|
| Mediaplast .../P
|
All Kettlitz-plasticizers are also available as dry liquid, if required (minimum
order quantity 500 kg). |
|
