Products A – Z
50 % granular preparation of trimethylolpropane trimethacrylate (TRIM) to improve the physical properties of peroxide-c…
70 % granular preparation of trimethylolpropane trimethacrylate (TRIM) to improve the physical properties of peroxide-c…
70 % active preparation of trimethylolpropane trimethacrylate (TRIM) bound to inert carriers in powder form. The use of…
Actigran SO 70 is a 70 % scorch-delayed trimethylolpropane trimethacrylate (TRIM) on an inert carrier in granular form…
Activator in granular form for reinforcing white fillers based on silica. Aktiol promotes long scorch times at lower te…
Biodegradable release agent for spraying and dipping systems for the treatment of unvulcanized rubber sheets, strips, p…
Mandrel release agent for the production of rubber hoses vulcanized on metal mandrels in autoclaves. The use of Antitac…
Highly effective magnesium stearate dispersion for use in batch-off dipping and spraying systems for the treatment of r…
Highly effective magnesium stearate dispersion for use in batch-off dipping and spraying systems for the treatment of r…
A biocide-stabilized Antitack BTO-31 LF variant which offers increased resistance to bacterial growth whilst not being…
Highly effective magnesium stearate dispersion for use as a release agent for unvulcanized rubber compounds. The magnes…
Magnesium stearate dispersion of high efficiency for the treatment of rubber sheets, stripes, granules and blanks in ba…
Highly effective magnesium stearate dispersion for use in batch-off dipping and spraying systems for the treatment of r…
Powder release agent based on inert minerals with wetting agents, defoamers and anti-corrosion additives for the treatm…
Release agent in powder form based on inert minerals with wetting agents, defoamers and anti-corrosion additives for th…
Powdered antitack agent, basically containing inert minerals in combination with detergents, anti-foam and anti-rust ag…
Non-foaming transparent release agent for the treatment of unvulcanized rubber sheets, strips or granules, which is par…
Release agent concentrate in paste form with 100 % active content based on magnesium stearate with surfactants, antifoa…
High-quality zinc stearate dispersion for use as a release agent for all types of raw rubber compounds. The zinc steara…
Highly concentrated zinc stearate dispersion (approx. 40 % zinc stearate) for use as a release agent for unvulcanized r…
Processing aid for compounds based on NR, EPDM, IIR and NBR. The processing behavior of rubber compounds during injecti…
Highly effective processing aid for mixtures in the food industry. All ingredients are listed in BfR XXI and according…
Granular processing aid with excellent compatibility in all common polymers such as NR, SBR, EPDM, CR, NBR, IIR, CSM, E…
Improved version of the product Dispergator FL. The rubber compound flow and Mooney viscosity are more strongly influen…
Dispergator KB has a 25 % higher active ingredient content than Dispergator DS. The water content of Dispergator KB is…
Polymer and water-free processing aid in granular form for natural and synthetic rubbers. Dispergator OX accelerates th…
Processing aid based on silicone compounds. The stickiness of poorly processable EPDM and EVA compounds is significantl…
Highly effective processing aid made from EPM rubber for rubber compounds based on EPDM, IIR, NBR and CR rubber. The in…
Powdered version of Haftolat, consisting of 75 % Haftolat and 25 % silica.
Very fine white powdered calcium hydroxide content of about 97.5 %. The finely ground quality of Kezadol CH alleviates…
Calcium oxide powder treated with especially clean paraffin oil produced according to DAB 10 (Deutsches Apothekerbuch 1…
Phlegmatized soft calcium oxide in granular form, for moisture binding for pressureless vulcanization.
Kezadol GR/DAB can be used for the production of food contact materials and applications. (BfR XXI).
Surface-treated calcium oxide powder which is used as a moisture binder in TPEs, plastic compounds and especially in PV…
Homogenizer for polymer blends. Mediaplast 40 supports the incorporation and distribution of fillers and at the same ti…
Cost-effective further development of KETTLITZ-Mediaplast 40. Highly effective and zinc-free homogenizing and physical…
Masticating agent and homogenizer, especially for NR or polymer compounds/ blends with natural rubber content. Mediapla…
Combination of homogenizer and chemical degradation agent. It allows polymer blends to be produced much faster and ther…
Combination of homogenizer and chemical degradation agent specially developed for rubber compounds based on natural rub…
Highly effective chemical degradation agent for natural and isoprene rubber. Mediaplast 60 is based on DBD combined wit…
Further development of the product KETTLITZ-Mediaplast 60 with the aim of further improving cost efficiency. Mediaplast…
A Synthetic plasticizer with low volatility and good low-temperature behaviour. Particularly suitable for use in EPDM a…
Processing aid to reduce the stickyness/tack of the surface of CR and IIR compounds. Mediaplast AT is very effective ev…
Highly effective processing aid, especially against the tackiness of EVA compounds with a vinyl acetate content of more…
Effective tackifier for rubber compounds based on natural and synthetic rubber. The product is delivered in a non-dusty…
Mediaplast LCCP/GR Preparation of a long-chain, chlorinated paraffin (chlorine content approx. 50 %) on silica as a car…
Non-staining, synthetic secondary plasticizer for PVC plastisols. It lowers the viscosity, permits higher filler loadin…
Special ester plasticizer for use in polar synthetic rubbers such as NBR, NBR/PVC, HNBR, CR, ACM, ECO and similar. Medi…
Mediaplast NB-5 is a phthalate-free blend of an adipic acid ester for use in polar synthetic rubber compounds such as N…
Phthalate-free mixture of ester plasticizer without hazard identification for the use in polar polymers like NBR, H- an…
Special diisononyl dicarboxylic acid ester for the replacement of existing phthalate plasticizers in rubber compounds b…
Tackifier based on liquid synthetic resins with aromatic character in powder form for use in polar rubber compounds suc…
Universally applicable non-coloring synthetic plasticizer with good low-temperature behavior. Mediaplast PM has excelle…
Synthetic plasticizer based on polyalkylbenzene. Primarily for use in elastomers with low to medium polarity, e.g. NR…
Semi-synthetic paraffin-based hydrocarbon for use in elastomers with low polarity (e.g. NR, IIR, BR, SBR, EPDM); non-st…
Non-discoloring processing aid and homogenizer. In rubber compounds based on NBR, EPDM, SBR and EVA, Mediaplast WH impr…
Powdered version of Mediaplast WH, consisting of 75 % Mediaplast WH and 25 % silica.
Mediatherm 250 LL Highly effective, long lasting heat transfer oil.
Mediatherm SNS II Highly effective, long lasting heat transfer oil.
Pertac/GR 60 % granular preparation of a liquid 1.2-polybutadiene for use in peroxide or sulphur cured rubber compounds…
50 % active preparation of an oligomeric vinyl silane to improve physical and electrical properties of peroxide cured r…
50 % active mercapto silane granules to improve physical properties of sulfur cured rubber compounds. Silanogran M reac…
Alternative product to the well-known product KETTLITZ-Silanogran PV. It is the 50% granular form of a tri-ethoxy-silyl…
50 % active preparation of a trimethoxysilyl-modified polybutadiene as granules to improve the physical properties espe…
50 % active preparation of the original Degussa reinforcing agent Si 69 as granules to improve the physical properties…
70 % active preparation of the original Degussa reinforcing agent Si 69 as granules.
50 % dry liquid of a triethoxyvinylsilane in granular form containing oligomeric alkyl groups. Besides the function as…
Powdery 70 % preparation of triallyl cyanurate (TAC) on finely divided silica as carrier material.
50 % granular preparation of triallyl cyanurate to improve the physical properties of peroxide-cured rubber compounds.
70 % granular preparation of triallyl cyanurate to improve the physical properties of peroxide-cured rubber compounds.
Powdery 50 % preparation of triallyl isocyanurate (TAIC) on finely divided silica as carrier material.
Powdery 70 % preparation of triallyl isocyanurate (TAIC) on finely divided silica as carrier material.
Further development of TAIC 70 focused on superior flowability of the fine powder product for especially soft compounds…
Dust-free prepared asbestos-free talc without significant quartz content (< 1 %). Kettlitz-Talcubex is used as a rel…